Our Top Picks
KitchenAid KSMPRA 3-pc Pasta Roller/Cutter Set for KitchenAid3-Piece Set9.7 x 3.8 x 2.2 inches7.5 poundsCheck on Amazon
Antree 3-1 Pasta Roller & Cutter Attachment Set3 in 1 Pasta Attachment Set8.26 x 6.69 x 2.16 inches3.5 poundsCheck on Amazon
GVODE 3Pcs Pasta Attachment for KitchenAid Stand MixerPack of 19.22 x 3.73 x 2.01 inches4.75 poundsCheck on Amazon
KitchenAid KSMPCA Pasta Cutter Attachment SetOne Size8.7 x 3.4 x 1.9 inches4.4 poundsCheck on Amazon
KitchenAId KSMPSA Pasta Roller Attachment for KitchenAid Stand1'9.7 x 3.8 x 2.2 inches2.4 poundsCheck on Amazon
A stand mixer already has the motor, the weight and the counter footprint, so a pasta attachment is the cheapest route into fresh noodles for anyone who owns one. The attachment locks into the mixer’s front power hub and lets the machine do the cranking while both hands stay free to feed and catch the dough. The five sets below cover the main ways to buy in: the genuine KitchenAid roller and cutter system, a combined third-party unit that never needs swapping, a stainless third-party three-piece set, a companion cutter pair adding two noodle widths, and a roller-only starting point for cooks who mainly want sheets.
As an Amazon Associate, we earn from qualifying purchases.
Quick answer
Start with the KitchenAid KSMPRA three-piece set if you want the genuine roller plus spaghetti and fettuccine cutters in one box. The Antree 3-in-1 suits anyone who hates swapping attachments mid-batch, GVODE’s stainless three-piece set is the third-party equivalent of the KitchenAid layout, the KSMPCA pair adds capellini and lasagnette cutters, and the KSMPSA roller alone is enough for lasagna sheets and hand-cut noodles.
KitchenAid KSMPRA 3-Piece Pasta Roller & Cutter Set
The KSMPRA is the reference set in this category and the one most other attachments are measured against. It contains three separate stainless steel attachments that lock into the mixer’s front power hub one at a time: a pasta roller, a spaghetti cutter and a fettuccine cutter, plus a cleaning brush for clearing dried flour from the rollers and cutter teeth.
The roller flattens dough into even sheets at adjustable thickness settings, so the same piece of equipment produces lasagna sheets, ravioli wrappers and the starting sheet for both cutters. The spaghetti cutter slices sheets into classic round-style strands, while the fettuccine cutter produces wider, flat ribbons. Because the pieces are separate, you can roll a full batch of sheets first and cut afterwards, which suits cooks who make several pasta types in one session.
Two ownership points are worth knowing. The set fits KitchenAid household stand mixers through the standard front hub, and the mixer is sold separately. Care is brush-clean only: these pieces are cleared of flour with the included brush rather than washed, so a quick brush-out after each session is part of the routine. For most KitchenAid owners who want the complete sheet-and-noodle workflow from the mixer’s own maker, this is the default pick.
Antree Pasta Maker Attachment 3 in 1 Set for KitchenAid Stand Mixers
Antree takes the opposite approach to the KitchenAid system: instead of three separate attachments, its 3-in-1 set combines the pasta sheet roller, the spaghetti cutter and the fettuccine cutter in a single housing. You mount it once and move between rolling and cutting by feeding the sheet through a different slot, with no stopping to swap pieces on the hub.
That single-unit design is the main reason to choose it. Small kitchens get one item to store instead of three, and a batch flows faster because the attachment stays on the mixer from the first pass to the last strand. A cleaning brush is included, and care follows the same brush-out pattern as the other metal attachments in this roundup.
Antree builds the set for KitchenAid stand mixers, and its listing also names Cuisinart SM-50 series mixers as compatible, a rare third-party option for Cuisinart owners. The trade-offs are the usual third-party ones: it is not a KitchenAid product, fit and finish vary more from unit to unit, and the combined housing is bulkier on the hub than a single-purpose roller. For mixer owners who value a fast, swap-free session over owning the original brand’s pieces, it is a sensible alternative.
GVODE Pasta Attachment for KitchenAid Stand Mixer, 3-Piece Stainless Steel Set
GVODE follows the KitchenAid layout rather than the Antree one: three separate pieces consisting of a pasta sheet roller, a spaghetti cutter and a fettuccine cutter, with a cleaning brush in the box. The set is built from stainless steel, including the housings, rollers, cutter blades and gears, which is the detail GVODE leads with and the main reason it anchors the third-party end of this category.
The roller produces sheets up to 5.5 inches wide with eight thickness settings, wide enough for lasagna and for feeding either cutter. The spaghetti cutter turns sheets into classic strands and the fettuccine cutter into hearty flat noodles, and GVODE also suggests the sheets for ravioli, dumpling wrappers and hand-cut pasta. Like the genuine set, the pieces mount one at a time on the front hub, so rolling and cutting stay as separate, unhurried steps.
Compatibility covers all KitchenAid household stand mixers, and GVODE states plainly that the set is not a KitchenAid product. That honesty is useful: buyers get the familiar three-piece workflow and stainless construction from a third-party maker, and should set expectations accordingly on packaging and support. If the Antree’s combined housing does not appeal but the genuine set is more than you want to spend, this is the middle path.
KitchenAid KSMPCA Pasta Cutter Attachment Set, 2-Piece
The KSMPCA is a companion set rather than a starter set, and it only makes sense once you already have a way to roll sheets. It contains two stainless steel cutters that mount on the same KitchenAid front hub: a capellini cutter and a lasagnette cutter. Neither piece rolls dough, so this set extends an existing setup instead of replacing one.
The capellini cutter slices sheets into very thin angel hair strands, the finest cut in the KitchenAid attachment range and one the standard sets do not include. The lasagnette cutter goes to the other extreme, cutting wide ribbon noodles that sit between fettuccine and a lasagna sheet in width, a shape that holds up well under rich, slow-cooked sauces. Together they fill the two gaps left by the spaghetti and fettuccine cutters in the KSMPRA box.
KitchenAid positions this pair as the completion piece for its pasta system, and that is exactly how to read it. Owners of the three-piece set who find themselves hand-cutting thin noodles or wide ribbons are the audience. If you do not own a roller yet, buy the roller first and treat this set as a later upgrade; bought in the wrong order, it is two cutters with nothing to feed them.
KitchenAid KSMPSA Pasta Roller Attachment
The KSMPSA is the simplest attachment in this roundup: a single stainless steel pasta roller with no cutters at all. It mounts on the KitchenAid front hub and flattens dough into even sheets at adjustable thickness settings, and that one job covers more cooking than it might sound.
Sheets are the foundation of lasagna, cannelloni, ravioli, tortellini and most filled pasta, and a powered roller produces them at a consistent thickness that hand rolling rarely matches across a whole batch. Sheets can also be cut by hand into rustic ribbons, which is how many home cooks actually work. For anyone whose pasta making is mostly layered and filled dishes, the cutters in the bigger sets may never leave the drawer, and this roller skips them entirely.
It is also the natural first piece of the KitchenAid system, because the spaghetti, fettuccine, capellini and lasagnette cutters can all be added later on the same hub. The limits are the obvious ones: strand pasta requires a separate cutter, and care is the same brush-clean routine as the other KitchenAid pieces. As a starting point for sheet-based pasta, though, it is the most focused buy here.
How to choose
Confirm the hub first. Every attachment here drives from the mixer’s front power hub, so check that your model has that hub and that the attachment names your mixer family: the KitchenAid pieces fit KitchenAid household stand mixers, the Antree also lists Cuisinart SM-50 series models, and the GVODE set targets the KitchenAid hub. An attachment that does not match your mixer is useless no matter how good it is.
Decide between separate pieces and a combined unit. Separate rollers and cutters, like the KSMPRA and GVODE sets, let you roll a whole batch before cutting, and each piece is smaller to store and clean. A combined unit like the Antree trades that flexibility for speed, since nothing gets swapped mid-session.
Match the set to the pasta you actually cook. Sheets alone call for a roller; strands need cutters; capellini and lasagnette widths only come from the companion set. Also decide early whether you want rolled pasta at all: attachments that extrude shaped pasta such as rigatoni and fusilli belong to a different class, the pasta press, and no roller set substitutes for one.
Finally, plan for cleaning. These metal attachments are brush-clean designs, not dishwasher pieces, so a few minutes with the included brush after each session is the real maintenance cost of every pick here.
Who should skip
Skip attachments entirely if you do not own a compatible stand mixer, because none of these products works on its own; a hand-crank or countertop pasta machine is the right category instead. Skip them if fresh pasta is a twice-a-year event, since a rolling pin and a knife handle that volume. Skip the cutter sets if you only make lasagna and filled pasta, and skip the roller-only pick if spaghetti night is the whole point. Anyone who wants extruded shapes such as rigatoni or bucatini should also look elsewhere, at pasta press attachments built for that job.
FAQ
Do these attachments fit every KitchenAid stand mixer?
The KitchenAid, Antree and GVODE attachments here are built for the standard front power hub found on KitchenAid household stand mixers, in both tilt-head and bowl-lift designs. Fit is about the hub, not the bowl size. Always confirm your model against the compatibility list on the product page before ordering, especially with third-party sets.
Can I wash pasta attachments in the dishwasher?
No. The metal rollers and cutters in these sets are brush-clean designs. Water can damage the internal gears and dull the cutter edges, so the routine is to let any stuck dough dry, then clear it with the included cleaning brush. Wipe the outside with a dry or slightly damp cloth and store the pieces dry.
What is the difference between a roller set and a pasta press?
A roller set flattens dough into sheets and then cuts those sheets into strands or ribbons, which covers lasagna, fettuccine, spaghetti and filled pasta. A pasta press pushes dough through shaped plates to extrude tubes and spirals such as rigatoni, fusilli and macaroni. They solve different problems, and many serious home cooks eventually own one of each.
Are third-party attachments a good idea for my mixer?
They can be, provided the maker states compatibility with your exact mixer family and you follow the speed guidance in its instructions. Third-party sets like the Antree and GVODE cost less than the genuine system and use the same hub, but they are not made or supported by the mixer’s manufacturer, so buy them for the design and materials rather than expecting brand-level support.
Final verdict
For most stand mixer owners, the KitchenAid KSMPRA set is the buy: genuine fit, stainless construction and the complete roll-and-cut workflow in one box. Choose the Antree 3-in-1 if swapping attachments mid-batch annoys you, or the GVODE set if you want the same layout in stainless from a third-party maker. Add the KSMPCA cutters when you outgrow two noodle widths, and start with the KSMPSA roller alone if your pasta life is lasagna and filled dishes. Every route begins with the same check: confirm the hub on your mixer, then pick the set that matches the pasta you cook most.
Product and ASIN Reference
| Product | ASIN |
|---|---|
| KitchenAid KSMPRA 3-Piece Pasta Roller & Cutter Set | B01DBGQR1K |
| Antree Pasta Maker Attachment 3 in 1 Set for KitchenAid Stand Mixers | B081WXKNGC |
| GVODE Pasta Attachment for KitchenAid Stand Mixer, 3-Piece Stainless Steel Set | B0721M32GH |
| KitchenAid KSMPCA Pasta Cutter Attachment Set, 2-Piece | B01ENK4SNC |
| KitchenAid KSMPSA Pasta Roller Attachment | B01ENK4W9M |
FAQ
Do these attachments fit every KitchenAid stand mixer?
Can I wash pasta attachments in the dishwasher?
What is the difference between a roller set and a pasta press?
Are third-party attachments a good idea for my mixer?
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
Set up recurring deliveries of everyday items on eligible products. Terms and savings are set by Amazon.
Explore Subscribe & SaveCollect the home and kitchen items you want in one registry that guests can shop from.
Create a wedding registryFree shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAs an Amazon Associate we earn from qualifying purchases.